13.5.
AUXILIARY FUNCTIONS
13.5.1. Throttle Pedal / Throttle Body / Wastegate Calibration
Master Switch OFF
-
Press the throttle pedal fully
-
Turn the Master Switch ON
-
Wait for the message "LIFT OFF" then take off the foot from the pedal.
-
If the calibration is validated, do a reset (master switch OFF then ON)
-
If the calibration has failed, redo the procedure from the start.
-
REMINDER: The calibration must be carried out after each replacement of engine, actuator
(throttle body, waste gate, and pedal), ECU and engine mapping.
13.5.2. Steering wheel angle zero
Align the wheels in a straight line and center the steering wheel (use the straight line
-
spacer);
Master switch ON, Power OFF, Map ROAD;
-
Select page 6 "Mechanical Page 1" on the Dashboard
-
Appui long sur le bouton Rouge du clavier additionnel de la console.
-
NOTE: This procedure must be carried out after replacing the steering wheel angle sensor,
intervention, on the rack or steering in general, as well as replacing the ECU.
Version E
User Guide 208 Rally 4 - 22/01/2021
LIFT OFF
Learning
OK – Do a Reset
Return to Content Table
P 61