Steering Wheel With Hands-On Detection; Shortcuts For Driving Aids - PEUGEOT 308 2023 Handbook

Steering wheel with
hands-on detection
(with Drive Assist 2.0)
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
The steering wheel is equipped with a hands-on
detection system to avoid distraction on the part
of the driver.
It is prohibited to cover or attach anything to the
steering wheel.
The driver must always check the
surroundings of the vehicle and
supervise the whole manoeuvre.
Any use of a system built into Drive Assist
2.0 must remain under the driver's vigilance.
The system also detects the presence of
hands when using the Lane Positioning assist
system with Drive Assist Plus.
The system may suffer interference or
not work correctly if:
– the steering wheel is covered by some
protection.
– the driver wears thick gloves (e.g. ski
gloves).
In the event of improper detection of hands
on the steering wheel, Drive Assist 2.0 is
not activated or is deactivated after a few
seconds.
Installation of mechanical anti-theft
devices on the steering wheel is
prohibited - risk of damage!

Shortcuts for driving aids

The full list of available driving aids can be found
in the Functions tab.
Driving aids can be accessed directly to quickly
activate/deactivate them.
By default, driving aids are already stored in the
Shortcuts tab (e.g. Stop & Start, Lane keeping
assist).
Other driving aids can be added or deleted from
this tab.
It is configured in the ADAS>Functions
touch screen application.
► Press the button corresponding to the
driving assistance concerned:
• Full symbol: the function is added to the
Shortcuts tab.
• Empty symbol: the function is deleted from
the Shortcuts tab.
► Check the modification in the Shortcuts tab.
► Press this button to access directly to the
Shortcuts tab.
Multiple deactivation
It is possible to deactivate several driver
assistance functions simultaneously.
This is done in two steps:
– First of all, the selection of all the functions
that you want to deactivate.
– Secondly, the simultaneous deactivation of all
these functions.
Selection of functions
► Press this button on the dashboard to
display the ADAS tabs.
► Select the Functions tab.
► Press this button to display the list of
available functions.
► Select the functions that will be deactivated
by a long press on the ADAS button at each
start (e.g. Stop-Start, Lane Keeping Assist,
Automatic Braking System (Active Safety
Brake)).
Driving
6
121