Presentation Of The Display - PEUGEOT 208 T16 User Manual

RPM LEDs
4
3
2
1
Buttons

Presentation of the display

Alarm LEDs
Information displayed:
− RPM
− 4 green LED gradually ON when approaching the optimum
upshift rev
− LED 5 red ON  optimum upshift
− Buttons
1. display of the next page or remove the alarm message
1
2. Long press with power OFF  water pump running (bleed of
the cooling circuit). Same procedure to stop the pump.
2
3. Not used
4. short press  swap alarm page
3
long press  zero of the consumed fuel volume
4
Alarms
−
− Blue LED are ON (still or blinking) when there is an alarm or
an important message displayed
• Led 1 blinking: high level alarm, we recommend to
stop the engine
• Led 1 still : medium level alarm, we recommend to
analyse the situation to decide if you drive at the
same rhythm or if you slow down
• Led 2 still : low level alarm, we recommend to
analyse the situation to decide if you drive at the
same rhythm or if you slow down
− Even if an alarm message is removed on the display, the blue
LED keep being ON to remind that an alarm is ON
Page 12/67
Version 24/04/2015