PEUGEOT 208 T16 User Manual page 49

Main window
The left window will help you to check both throttle and pedal functioning:
– Check that the 4 channels dedicated to throttle (target, calculated throttle position, throttle position 1 and 2) are same
values. If Throttle1 and Throttle2 are different, it means that one of the electric track of the throttle is damaged. If
Throttle differs from ThrottleTgt, it means the throttle command is not working well (electrical OC or SC with the loom
between the ECU and the throttle body or Throttle motor failure).
– Check that the 3 channels dedicated to pedal (calculated pedal position, pedal position 1 and 2) are same values. If one
of them is different, it means that one of the electric track of the pedal is damaged.
– You can see which throttle map has been selected.
– You can see the Throttle Diagnostic, it must be 0.
– You can check the status of the throttle/pedal learning. It must be 0 when you are not doing the learning.
The top right window shows how is the throttle/pedal map selected by the driver.
The bottom histogram shows you the distribution of pedal and throttle positions.
Wintax – Layouts
Throttle
Page 49/67
Version 24/04/2015