Wintax – Download Data With Ethernet Cable; Acquisition Manager - PEUGEOT 208 T16 User Manual

Wintax – Download data with Ethernet cable

Acquisition Manager

– Open the Acquisition Manager
– Connect the Ethernet cable between the Ethernet port of your USB and the Ethernet connector of your 208T16, main switch
must be ON. If the connection is ok, you would see the Alias name of the ECU. Then click on the Setup Acquisition icon.
– Complete the information Track, Session and Run Name, as shown below for the Monte Carlo Rally, and validate with a green
icon.
Page 34/67
Version 24/04/2015