Battery Charging After Prolonged Inactivity; Operating Tips - AMBROGIO LINE 250 User Manual

BATTERY CHARGING AFTER PROLONGED INACTIVITY

Danger - Attention
Do not recharge the robot in explosive and flammable environments.
1. Supply electricity to the charging station and make sure the
charging plates are clean.
2. Position the robot inside the charging station without turning
it on.
3. Check that the charging knobs are in contact with the charging
plates and that the display turns on indicating the battery's
charging level .
4. At the end of the charging cycle (about 6 hours) remove the
robot from the charging station.
5. Store the robot in a protected and dry place with an ambient
temperature between 10°C and 20°C, out of reach of children,
pets, other foreign objects, etc.
Below are some useful operating tips to follow when using the robot:
-
even after being suitably informed on the use of the robot, it is always a good idea to simulate some test manoeuvres on first
use to identify the commands and main functions;
-
check and secure the fastening screws of the main components;
-
mow the lawn frequently to avoid excessive growth of the grass;
-
do not use the robot to mow grass which is 1 cm (0.40 ") higher than the cutting blade. In case of high grass, lift the cutting
blade and then lower it gradually on the following days;
-
if the lawn is equipped with an automatic sprinkler system, program the robot to return to the charging system at least one
hour before the sprinklers are turned on;
-
check the slope of the ground and make sure the maximum values allowed are not exceeded in order to prevent damage to
the robot and the sprinklers;
-
it is recommended to program the robot so that it does not work more than is necessary, also taking into consideration the
different growth rates of the grass in different seasons, so as not to subject it to unnecessary deterioration and reduction of
the battery life;
-
when using the robot, make sure the work area is clear of people (in particular, children, the elderly or disabled people) and
pets in order to prevent safety risks. To minimise the chance of injury, program the robot so that it operates at suitable times
of the day.
10:30

OPERATING TIPS

31
GPS
EN
User's manual