5. Fasten the charging station (N) to the ground with the pegs (P).
If necessary, secure the charging station with screw anchors
(Q).
6. Install the power supply unit (A).
7. Connect the power cord (E) of the charging station (N) to the
power supply unit (A).
8. Connect the plug of the power supply unit (A) to the electrical
outlet.
9. If the LED of the transmitter flashes, the connection is correct.
Otherwise, find the anomaly (see "Troubleshooting Guide").
10. Replace the protection (L).
pegs (P)
charging station (N)
transmitter (B)
power cord (E)
charging station (N)
19
screw anchors (Q)
current power
supply unit (A)
Perimeter
wire
H. min. 160 cm
(63.00 ")
protection (L)
User's manual
EN