Fusion Options - FRIATEC FRIAMAT Prime Operating Instructions Manual

1. Press the
ME N U
2. Press the direction keys
3. Press the
S E LE C T
4. Selecting the menu item "MEMORY STICK" opens the prompt
"ARE YOU SURE?".
5. Press the
O K
6. Press the
O K
"MEMORY STICK NOW FORMATTED".
NOTE
Use the FRIATEC memory stick!
FRIATEC accepts no warranty claims arising from the use of standard USB sticks.
6.12

Fusion options

6.12.1 ID Data
INFORMATION
The "ID Data" option is first activated and hence shown on the display when
documentation has been activated!
"ID Data" are data that can be assigned directly to the fusion that is now to
be started: commission number, operator pass, serial number, and seam
number. These additional details are described in the following.
INFORMATION
Commission numbers and seam numbers can be entered only when the docu-
mentation and the functions "Commission number" (see Section 6.4.1) or
"Seam Number" (see Section 6.4.11) have been activated!
6.12.1.1 Commission number
1. Press the
I D - D AT E N
2. Use the direction keys
3. When entering an commission number for the first time, press the
guide key.
C H AN G E
4. The first digit starts to flash. Press the direction keys
enter the commission number.
5. Press the
S AV E
key to cancel without saving.
guide key.
to open the "Format" submenu.
guide key.
guide key.
guide key to acknowledge the message
guide key.
to select "Commission number".
guide key to save your changes. Press the
EN
and to
guide
C A N CE L
35