Subcontractor; Traceability; Pipe Number; Pipe Length - FRIATEC FRIAMAT Prime Operating Instructions Manual

6.8.6

Subcontractor

The "Subcontractor" submenu lets you decide whether additional text infor-
mation can be entered for a fusion.
6.8.7

Traceability

The "Traceability" submenu lets you enable the FRIAMAT Prime for reading
in, processing, and storing traceability barcodes. Enabling this menu also
activates the submenus "Pipe Number" and "Pipe Length".
6.8.8

Pipe Number

The "Pipe Number" submenu lets you decide whether an individual pipe
number can be entered for each of the fusion pipes.
6.8.9

Pipe Length

The "Pipe Length" submenu lets you decide whether the length can be
entered for each of the fusion pipes.
6.8.10

GPS Data

The "GPS Data" submenu lets you decide whether the coordinates/location
of the fitting can be entered for a fusion.
INFORMATION
A corresponding device is needed to determine the GPS data!
6.8.11

Seam number

The "Seam number" submenu lets you decide whether a seam number can
be entered for a fusion.
6.8.12

Scraper tool

The "Scraper Tool" submenu lets you decide whether the data (e.g. device
number) of the scraper tool used to prepare for fusion can be entered for a
fusion. The scraper tool must then bear a corresponding barcode.
EN
31