Installation; Unpacking - AE Techron LVC 5050 Quick Start Manual

Installation

This section describes general guidelines for installing the Model LVC
5050 amplifier with special emphasis on system installations.

Unpacking

Every AE T
ECHRON
tested prior to leaving the factory. Carefully unpack and inspect the
unit for damage in shipment. Besides the amplifier, you should find
this manual and mounting hardware in the package.
1) Inspect the crating for ANY signs of damage.
a. Make written notes of any damage for future reference.
b. If damage is found notify the transportation company
immediately
c. Save the shipping carton and packing materials as evidence of
damage for the shipper's inspection.
d. If severe damage is apparent, DO NOT proceed until a
representative of the shipping company is present.
2) Uncrate/unpack the amplifier
3) Save the packing materials for later use in transporting or shipping
the unit.
AE T will cooperate fully in the case of any shipping damage
ECHRON
investigation. In any event, replacement-packing materials are
available from AE T
NOTE: Never ship this unit without proper packaging.
Page 14
Model LVC 5050 is carefully inspected and
.
ECHRON