Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 115-149 N∙m (85-110 ft-lb).
1. Warning—do not touch the hot surface.
93-7818
106-5517
decaloemmarkt
decal93-7818
decal106-5517
1. Warning–there is no rollover protection when the roll bar is
down.
2. To avoid injury or death from a rollover accident, keep the
roll bar in the raised and locked position and wear the seat
belt. Lower the roll bar only when absolutely necessary; do
not wear the seat belt when the roll bar is down.
3. Read the Operator's Manual; drive slowly and carefully.
6
107-3069
109-6014
decal107-3069
decal109-6014