Engine Maintenance; Engine Safety; Servicing The Engine - Toro 74447TE Operator's Manual

Engine Maintenance

WARNING
Contact with hot surfaces may cause personal injury.
Keep hands, feet, face, clothing and other body parts away the muffler and other hot surfaces.

Engine Safety

Shut off the engine before checking the oil or adding oil to
the crankcase.

Servicing the Engine

Servicing the Air Cleaner
Service Interval: Every 25 hours/Monthly (whichever
comes first)—For Toro engines—clean
the air-cleaner foam element (more often
in dusty, dirty conditions).
Every 100 hours/Yearly (whichever comes first)—For
Toro engines—replace the air-cleaner foam element
(more often in dusty, dirty conditions).
Every 100 hours/Yearly (whichever comes first)—For
Toro engines—service the air-cleaner paper element
(more often in dusty, dirty conditions).
Every 200 hours/Every 2 years (whichever comes
first)—For Toro engines—replace the air-cleaner
paper element (more often in dusty, dirty conditions).
Removing the Elements
1. Park the machine on a level surface and disengage the
blade-control switch (PTO).
2. Engage the parking brake, shut off the engine, remove
the key, and wait for all moving parts to stop before
leaving the operating position.
3. Clean around the air-cleaner cover to prevent dirt from
getting into the engine and causing damage.
4. Lift the cover and rotate the air-cleaner assembly out
of the engine (Figure 42).
5. Remove the foam element from the paper element
(Figure 43).
Servicing the Foam Element
Wash the foam element with water and replace it if it is
damaged.
35
g027800
Figure 42
g027802
Figure 43
g027800
g027801
g027801
g027802