Servicing The Fuses; Drive System Maintenance; Checking The Seat Belt; Checking The Roll-Bar Knobs - Toro 74447TE Operator's Manual

Servicing the Fuses

The electrical system is protected by fuses. It requires no
maintenance, however, if a fuse blows check the component
and circuit for a malfunction or short.
The fuses are located on the right console next to the seat
(Figure 55).
1. To replace the fuses, pull out the fuse to remove it.
2. Install a new fuse (Figure
1
Figure 55
1. Fuse cover
2. Fuse holder
55).
2 3
g036858
3. Fuel-shutoff valve
Drive System
Maintenance

Checking the Seat Belt

Service Interval: Before each use or daily
Inspect the seat belt for wear, cuts, and proper operation of
the retractor and buckle. Replace the seat belt if it is damaged.
Checking the Roll-Bar
Knobs
Service Interval: Before each use or daily
WARNING
To avoid injury or death from rollover, keep the roll
bar in the fully raised, locked position and use the
seat belt.
Ensure that the seat is secured to the machine.
g036858
•
Check that both the mounting hardware and the knobs
are in good working condition.
•
Make sure that the knobs are fully engaged with the roll
bar in the raised position.
Note: The upper hoop of the roll bar may need to be
pushed forward or pulled rearward to fully engage both
knobs (Figure 56
43
and Figure 57).