Printing From A Printer Connected To An Interface That Is Not Set In The Console - Mitsubishi QD51-R24 User Manual

4 ABOUT QD51 (-R24) FUNCTIONS

4.3.1 Printing from a printer connected to an interface that is not set in the console

4 - 11
Here, the way of thinking in the case of printing from a printer connected to an interface
that is not set in the console is explained.
QD51
QD51
RUN ERR
PRG P.RUN
SD SD
CH.1 CH.2
RD RD
CH.1
RS-232
CH.1
CH.2
RS-232
QD51
[Printout procedure]
The procedure for printing from a printer connected to an interface that is not set in the
console is shown below.
Start
Open the channel of
the terminal where
······ Open the channel which the terminal is connected to using
the data are to be
the ZOPEN command.
displayed.
Set the data output
······ Set the data output destination in the channel the terminal is
destination.
connected to using the ZLDVcommand.
Output data to the
······ Output data to the terminal by the LPRINT command, etc.
terminal.
Close the terminal
······ Close the channel which the terminal is connected to using
channel.
the ZCLOSE command.
End
Data output
MELSEC-Q
Printer
SIN(120°)
4 - 11