Table of Contents
Advertisement
4 ABOUT QD51 (-R24) FUNCTIONS
4 - 7
[Command and functions used]
The commands and functions used to display data on the terminal screen are as
shown below.
Command, Function Name
ZOPEN
ZCLOSE
ZCNTL
ZODV
PRINT
PRINT USING
LOCATE
CLS
Processing Contents
Opens the interface and prepares for communications with an
external device.
Closes the interface.
Sets the communications parameters in the currently open interface
and reads the interface status.
Switches the data output destination.
Displays the data on the terminal screen.
Displays the data on the terminal screen. (The format can be
designated).
Specifies the data display position on the terminal screen.
Clears the terminal screen.
MELSEC-Q
4 - 7
Advertisement
Table of Contents
