Operating Instructions; Setting Clock; Timer; Easy Cook - Amana M1020E Owner's Manual & Cooking Manual

SETTING CLOCK

This is a 12 hour clock. When your oven is plugged in
for the first time or when power resumes after a power
interruption, the numbers in the display reset to 0.
Example: To set 11:11
CLOCK
1 1 1 1
CLOCK

TIMER

You can use the Timer of your oven for purposes
other than food cooking.
Example: To set 11:11
TIMER
3 0 0
START

EASY COOK

A time-saving pad, this simplified control lets you
quickly set and start microwave cooking without the
need to touch START.
Example: To set EASY COOK for 2 minutes.
Touch EASY COOK
4 times. The oven begins cooking
EASY
COOK and display shows time counting
down.

OPERATING INSTRUCTIONS

1. Touch CLOCK.
2. Enter the time by using
the number key pads.
[1], [1], [1], and [1].
3. Touch CLOCK.
The clock starts counting.
1. Touch TIMER pad
2. Touch 3,0,0.
3. Touch START pad.
NOTE:
If you touch EASY COOK, it will add 30 seconds up
to 3 minutes 30 seconds; after 3 minutes
30 seconds, every touch will add 1 minute up to 99
min 59 seconds.

TIME COOK

This function allows you to cook food for a desired
time. And in order to give you the best results, there
are 10 power level settings in addition to HI-POWER
because many foods need slower cooking (at less
than HI-POWER).
Example: To cook food on 80% Power(Power8) for 5
minutes 30 seconds
5 3 0
POWER
LEVEL
8
START
When the cooking time is over, two short and one
long tone sounds. The word End shows in the display
window. Then the oven shuts itself off.
NOTE :
If you do not select the power level, the oven will
operate at power HIGH. To set HI-POWER cooking,
skip steps 2 & 3 above.
11
1. Enter 5 minutes 30 seconds by
touching [5], [3],and [0].
2. Touch POWER LEVEL.
P-HI appears in the display.
This is to tell you that the oven
is set on HI unless a different
power setting is chosen.
3. Touch 8.
To select power level 80%.
Display shows P-80.
4. Touch START.