Operating Instructions; Setting Clock; Timer; Easy Cook - Amana M1031E Owner's Manual & Cooking Manual

Operating Instructions

SETTING CLOCK

When your oven is plugged in for the first time or when
power resumes after a power interruption, the words
PLEASE ENTER TIME OF DAY in the display scrolls five
times.
Example: To set 11:11 am or pm.
1. Touch CLOCK pad once for AM
CLOCK
1 1 1 1
2. Enter the time by using the
3. Touch START pad .
START

TIMER

The timer feature allows the display to count down without
the oven heating.
Example: To set the timer to 11 minutes and 11 seconds.
1. Touch TIMER pad.
Display scrolls the words
TIMER
ENTER TIME.
2. Touch [1] pad 4 times.
1 1 1 1
Display scrolls the words
11:11 PRESS START.
3. Touch START pad.
START
(Start count down)
or twice for PM.
Display scrolls the words
AM (or PM) ENTER TIME OF
DAY.
number pads.
Touch [1] pad 4 times.
Display scrolls the words
11:11 AM (or PM) PRESS
START.
(Start Clock)

EASY COOK

Lets you quickly set and start microwave cooking without
the need to touch START.
NOTE:
If you touch EASY COOK pad, it will add 30 seconds up to
3 minutes 30 seconds; after 3 minutes
30 seconds, every touch will add 1 minute up to 99 min 59
seconds.
Example: To set EASY COOK pad for 2 minutes.
Touch EASY COOK pad 4 times.
EASY
The oven begins cooking and display
COOK
shows time counting down.

TIME COOK

This feature allows you to heat for a desired amount of time
at a desired power level.
Use the eleven power levels to heat food slowly and evenly.
NOTE :
If you do not select the power level, the oven will operate at
power HIGH. To set HI-POWER cooking, skip steps 2 & 3.
Example: To cook food on 80% Power (power8) for 11
minutes 11 seconds
1. Enter 11 minutes 11 seconds by
1 1 1 1
POWER
2. Touch POWER LEVEL pad.
LEVEL
8 3. Touch [8] pad.
4. Touch START pad.
START
When cooking is complete, two short tones and one long
tone will sound. The word END shows in the display
window. Then, the oven shuts itself off.
10
touching [1] pad 4 times.
Display scrolls the words
11:11 PRESS START OR POWER.
Display scrolls the words
ENTER POWER LEVEL 0 TO 10.
To select power level 80%.
Display scrolls the words
P-80 PRESS START.