Operating Instructions; Setting Clock; Timer; Easy Cook - Amana F1320E Owner's Manual & Cooking Manual

SETTING CLOCK

This is a 12 hour clock. When your oven is plugged in
for the first time or when power resumes after a
power interruption, the word ENTER TIME OF DAY in
the display scrolls five times.
Example: To set 11:11
1. Touch CLOCK.
CLOCK
2. Enter the time by using the
1 1 1 1
3. Touch START.
START

TIMER

You can use the TIMER of your oven for purposes
other than food cooking.
Example: To set the timer
1. Touch TIMER pad.
Display scrolls the words ENTER
TIMER
TIME IN MIN AND SEC.
2. Touch 3, 0, 0.
3 0 0
Display scrolls the words
TOUCH START.
3. Touch START pad.
START

OPERATING INSTRUCTIONS

Display scrolls the words
ENTER TIME OF DAY.
number key pads.
[1], [1], [1], and [1].
Display scrolls the words
TOUCH START.

EASY COOK

A time-saving pad, this simplified control lets you
quickly set and start microwave cooking without the
need to touch START.
Example: To set EASY COOK for 2 minutes.
Touch EASY COOK 4 times.
EASY
The oven begins cooking and
COOK
display shows time counting down.
NOTE:
If you touch EASY COOK, it will add 30 seconds up
to 3 minutes 30 seconds; after 3 minutes
30 seconds, every touch will add 1 minute up to 99
min 59 seconds.

TIME COOK

This function allows you to cook food for a desired
time. And in order to give you the best results, there
are 10 power level settings in addition to HI-POWER
because many foods need slower cooking (at less
than HI-POWER).
Example: To cook food on 80% Power (power8) for
5 minutes 30 seconds
1. Enter 5 minutes 30 seconds by
5 3 0
POWER
2. Touch POWER LEVEL.
LEVEL
3. Touch 8.
8
4. Touch START.
START
When cooking is complete, two short tones and one
long tone will sound. The word END shows in the
display window. Then the oven shuts itself off.
NOTE :
If you do not select the power level, the oven will
operate at power HIGH. To set HI-POWER cooking,
skip steps 2 & 3 above.
11
touching [5], [3], and [0]. Display
scrolls the words TOUCH START
OR POWER.
Display scrolls the words ENTER
POWER LEVEL 1 TO 10.
To select power level 80%.
Display scrolls the words P-80
TOUCH START.