Car Kit Environment; Creating New Environment - Benefon ESC Owner's Manual

CAR KIT ENVIRONMENT

In this menu you can set one of the environments
to be the default environment for the car kit. Each
time when you connect the phone to a car kit, the
default car kit environment will be turned on auto-
matically. As you disconnect the phone from the
car kit, previously used environment will be turned
on.
Select Car kit and press
desired environment with
If you do not want to use any specific environment
with the car kit, select the option
the environment will not be changed automatically
when the phone is connected to the car kit.
If you want to use some other environment than
the default car kit environment while the phone is
connected to the car kit, you may select another
environment in the Quick menu
72 MAIN MENU: SETTINGS
-
. Highlight the
CHANGE
n -
and press
OK
None . This way,
.

CREATING NEW ENVIRONMENT

To create an environment of your own, select
At most two additional environments can be made.
N a m i n g t h e e n v i r o n m e n t
You can change the name of an environment,
which you have created yourself.
1. Select Name
.
2. Key in a new name with alphanumeric keys and
-
press
OK
C h a n g i n g b a s e e n v i r o n m e n t
You can select which one of the default environ-
ments your new environment is based on. The ini-
tial values of all the environment settings will be
copied from that environment.
1. Select
Based on
2. Select the base environment and press
3. When you are finished, press
have made any changes to the environment,
you will be asked if you want to save or discard
them. Make your choice and press
UBER-1017 - Page 78
-
and press
CHANGE
.
-
and press
CHANGE
.
DONE
New .
.
.
-
.
OK
. If you
-
.
OK