the services. The services are only available from
certain service providers.
REQUESTING AGPS
You can request the service provider to send you
assisted GPS information. Before sending the re-
quest, make sure, the AGPS settings are correctly
done. For further information, please see the chap-
ter Main menu, Settings, GPS, AGPS.
-
1. Press
to enter the GPS menu.
GPS
n
2. Use
to select
Request AGPS
.
LECT
3. Confirm the request by pressing
UPDATING POSITION
You can make the GPS receiver to update your po-
sition at once.
-
1. Press
to enter the
GPS
n
2. Use
to select
Update position
.
OK
138
GPS MENU: REQUESTING AGPS
-
and press
SE-
-
OK.
GPS menu
.
-
and press
SKIPPING ROUTE POINT
Use this option if your current destination is a
route and you want to skip a route point.
-
1. Press
to enter the GPS menu.
GPS
n
2. Use
to select
Skip route point
.
LECT
3. Select your next route point by scrolling the list
and highlighting the point with
LECT.
CLEARING DESTINATION
When you no longer want to use a point as destina-
tion, do as follows:
-
1. Press
to enter the
GPS
n
2. Use
to select
Clear destination
After clearing the destination, the navigator pages
will no longer provide any guidance in navigating
to a destination.
You do not need to clear the destination to be able
to select a new destination.
Destination can only be cleared when a point is be-
ing used as destination.
UBER-1017 - Page 144
-
and press
SE-
n
-
. Press
SE-
GPS menu
.
-
. Press
.
OK