Car Kit; Antenna; Phone Holder Kds-60; Microphone - Benefon SPICA TDP-60-HN Service Manual

3.2 CAR KIT

The Car Kit includes a phone holder (KDS-60), a car box (UDH-60), an
antenna, an installation base, a hf speaker, a microphone and a cable. The Car
Kit sales package also includes an installation materials bag, which contains
the necessary installation equipment. On the next page you will find a diagram
of connections explaining how to install the Car Kit.
Caution:
The Car Kit should only be installed by Benefon authorized installer. The end
user should never attempt to install the Car Kit without professional assistance.
Professional installers have the required tools and knowledge for installing the
Car Kit properly and safely. The terms of warranty also require that the Car Kit
is installed by professionally trained personnel. Cable routing may cause
interference with the components of the vehicle's electronic systems (such as
ignition and braking systems). It is recommended that cables not be routed
next to such electronic components.

3.2.1 Antenna

Choose a suitable place for the antenna. It is recommended that you place the
antenna on the roof of the vehicle.

3.2.2 Phone Holder KDS-60

Choose such a place for the phone holder in the vehicle that will be both easy
and safe when using the phone. Remember to leave enough space for the
antenna plug behind the phone holder. First, fix the installation base to the
place you have chosen, and then install the phone holder in the installation
base.

3.2.3 Microphone

Install the microphone so that it is aimed directly at the user, and comes as
close as possible to the user's mouth. A good place for the microphone is near
the rearview mirror where the noise level is lower than, for example, beside a
windshield pillar. It is also possible to install the microphone on a sun visor, but
then it will be inconvenient to use the sun visor and microphone at the same
time. One alternative would be a swan-neck microphone as it can be placed
closest to the user's mouth.

3.2.4 Cable

Obtain the necessary (+)-electrical current from a suitable place, preferably
directly from the battery of the vehicle. Connect the fuse chamber to the (+)-
wire. You will find the fuse chamber in the installation materials bag. Connect
6DP_60GB.fm
Product: TDP-60-HN /
1.3.1999
Installation Instructions
5