GE F60 Instruction Manual page 129
Feeder protection system
Hide thumbs
Also See for F60:
- Instruction manual (732 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (680 pages)
Table of Contents
Advertisement
CHAPTER 4: INTERFACES
With respect to the figure, the traceability feature is used as follows.
1.
The transfer date of a settings file written to a F60 is logged in the relay and can be viewed in the EnerVista software
or the front panel display. Likewise, the transfer date of a settings file saved to a local computer is logged in the
EnerVista software.
2.
Comparing the dates stored in the relay and on the settings file at any time in the future indicates if any changes have
been made to the relay configuration since the settings file was saved.
4.1.9.1 Settings file traceability information
The serial number and file transfer date are saved in the settings files when they are sent to a F60 device.
The F60 serial number and file transfer date are included in the settings file device definition within the EnerVista UR Setup
offline window as shown in the example.
This information is also available in printed settings file reports as shown in the example.
F60 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
Figure 4-13: Settings file traceability
Figure 4-14: Device definition showing traceability data
ENERVISTA SOFTWARE INTERFACE
4-13
4
Advertisement
Table of Contents
