Connecting The Cables; Alarm Input And Output Connection - HIKVISION DS-2DF8223I-AEL Installation Manual

Network Speed Dome Installation Manual

1.1.5 Connecting the Cables

Before you start:
Please make sure the power of the dome is off before connecting the cables.
The cable interfaces of speed dome are shown in the Figure 1-33. Please refer to the following
figure for connecting the cables.
No.
1
3
5
7

1.2 Alarm Input and Output Connection

 The network speed dome can be connected with alarm inputs (0~5 VDC)
 Refer to the following diagrams for alarm output:
Figure 1-33 Cable of Network Speed Dome
Table 1-1 Descriptions of Cable Interface
Description
Network Cable
Alarm Out
Alarm In
Power Cable
1
2
3
4
5
6
7
No. Description
2 Video Cable
4 Audio Cable
6 RS-485
14