Cycle Data Storage; Store 5000 Cycle Data - Atlas Copco PowerMACS 4000 User Manual

Appendix
10.3

Cycle Data Storage

This scenario exemplifies the number of cycle datas possible to store given a typical reporter
configuration. The setup includes a ToolsNet device and an Ethernet device of type DC PLUS.
Station Data
Station number
Cycle Start Time
Status
Data no station
Wp. Id
Mode No
Station Name
Mode Name
Station QO
Station SA
Station AB
Id Res 4
Amount of SRAM used
for Cycle Data
30 % (Default)
75 %
10.3.1

Store 5000 Cycle Data

It is possible to store more than 5000 cycle data by distribute the storage to all TCs included in a system.
The cycle data for each bolt is stored locally on the TC the bolt was run on. To be able to store more than
5000 cycle data the size of the cycle data storage has to be increased on the expense of trace data
storage (there will still be room for more than 20+ trace).
SRAM
Please see chapter
654
Bolt Data
Op Mode Failing Step No
Bolt No Bolt Pgm Strategy
Status Spindle No
Program Name Bolt T
Ordinal No Bolt A
Errors Bolt Name
RM Errors Program number
Warnings Limits (Bolt T)
Compact Errors Limits (Bolt A)
Bolt Name
Cust Error
System with 2 bolts
900 cycles
2400 cycles
for more information.
Step Data
Step No
Peak T
A
Shut Off T
Peak T3
System with 8 bolts
280 cycles
700 cycles
System with 16 bolts
140 cycles
360 cycles
9836 3521 01