Table of Contents
Advertisement
3 M a n a g i n g P r o g r a m s
Using ActiveSync
3
Perform the steps below on your device:
You can connect to your device using the ActiveSync or the Internet Sharing
application.
Using ActiveSync to synchronize with your computer:
(a)
(b)
(c)
(d)
(e)
Using Internet Sharing to synchronize with your computer:
(a)
(b)
(c)
Infrared connection
The IrDA-standard infrared port allows you to synchronize information with an infrared-
enabled computer. Simply align the infrared port of your device with that on the
computer. This method is ideal for quickly switching between multiple devices since there
are no cables or adapters to change.
1
Perform the steps below on your computer:
(a)
(b)
(c)
(d)
(e)
2
Perform the steps below on your device:
(a)
(b)
(c)
32
Initiate connection by tapping
Tap Menu, then Connections.
Select the "Synchronize all PCs using this connection" check box.
Select USB.
Tap OK.
Tap
, Programs, then Internet Sharing
Under the "PC Connection" list, select USB.
Tap Connect.
Configure an infrared port on your computer following the manufacturer's
instructions.
Once your computer's IR port
Click File, then Connection Settings.
Under the "In the Allow serial cable or infrared connection to this COM port"
list, select Infrared Port (IR).
Click OK.
Align the IR port
of your device with that on your computer so that they
are unobstructed and within close range.
Initiate connection by tapping
Tap Sync.
, Programs, then ActiveSync
.
is ready, open ActiveSync
, ActiveSync, Menu, then Connect via IR.
.
.
Advertisement
Table of Contents
