Power Supply Connections; Limit Of Pan And Tilt - Eneo VKC-13120F2810IR Installation And Operating Instructions Manual

5.2 Power Supply Connections

Camera can work with either VDC or 4VAC, dual voltage power.
It is strongly required the polarity-matched connection for 12VDC supply, otherwise IR LEDs will not operate
at night.
Primary and secondary grounds are completely isolated to avoid the possible ground-loop problems.

5.3 Limit of Pan and Tilt

1. Pan limit
Pan is limited to +/- 90°.
Clamp connectors of power input:
4VAC / VDC (red wire)
4VAC / GND (black wire)
RS-485– (gray wire)
RS-485+ (white wire)
Video (BNC)
40