Adding A Trial - NDD EasyOne Operator's Manual

EasyGuide
the result screen and on the test protocol. Post-Tests can only be added to previous tests on the same
day.
To add the Post -test immediately after the FVC or the FVL test select the field POST on the result
screen.
When coming from the main menu you can add a post test to a previous test as follows:
Select Perform Test in the main menu
Choose the field RECALL and press ENTER
Scroll through the list of tests until you get to the desired pre-med test and press ENTER
Select the field POST
Proceed as described in Chapter 9.1 and 9.2
9.9

Adding a Trial

If you would like to add trials to a previous test, e.g. if the patient needed a break, please proceed as
follows:
Select Perform Test in the main menu
Choose the field RECALL and press ENTER
Scroll through the list of tests until you get to the desired test and press ENTER
Select the field ADD
Proceed as described in Chapter 9.1 and 9.2
Please mind that it is only possible to add a trial to a previous test that was performed on the same
day.
Page 21