Setting Language, Date, Time, Altitude (Above Sea Level) And Printer Type; Operating The Keys - NDD EasyOne Operator's Manual

EasyGuide
The following picture shows how the EasyOne
Caution:
Connect only printers and computers that comply with IEC 60950-1 Standards.
4.2

Setting Language, Date, Time, Altitude (above sea level) and Printer Type

Press the (ON/OFF) key for at least 2 seconds in order to switch on the instrument. The instrument
switches off automatically if no key is pressed for 15 minutes.
If you are switching on the instrument for the first time, you will be prompted to choose a region, the
language and to enter the date, time, altitude above sea level and approximate relative humidity at the
instrument's location. This data is not pre-set. If you intend to print reports, you can also select the
right printer type on the instrument.
The spirometer is delivered with the pre-set default settings. Please refer to Chapter 8 of this User Ma-
nual for the procedure for changing the settings. Adapting the settings to your needs allows you to get
the most out of your EasyOne
After you have made the above settings when switching on the instrument for the first time, you can
then change any settings at any time using the CONFIGURATION menu item from the main menu.
4.3

Operating the Keys

(ON/OFF) This switches EasyOne
you hear an audible signal.
(ENTER) This confirms data entry or the selection and moves you to the next entry field.
(<) Deletes last character, scrolls to the left or up.
(>) Scrolls to the right or down
(0,ESC) Press the key briefly in order to enter (0),
keep the key pressed longer (at least 1 sec.) in order to return to the previous field
with (ESC) or abort the operation,
press the key briefly twice in order to enter a blank (the key function operates only if
letters can be entered).
(2,abc), etc. Press the key briefly in order to enter the digit "2",
press the key briefly in order to enter "A" (the key function operates only if letters can
be entered),
press the key briefly twice in order to enter "B" (the key function operates only if let-
ters can be entered),
if you press the same key quickly several times consecutively, you will scroll first to
Screen Connector is used:
instrument.
on or off. Press and hold the key (for at least 2 sec.) until
Page 7