Os Upgrade; Factory Reset - Elektron analog drive User Manual

Setting
SysEx

6.3 OS UPGRADE

You also have the possibility to update the Analog Drive's operating system using the MIDI In port. To
send the OS SysEx file, use our free SysEx utility software C6, available for Windows and Mac OS (or
other compatible SysEx software). You can download the OS SysEx file and the C6 software from the
Elektron website.
1. Connect the device that you want to use to send the OS SysEx file to the MIDI In of the Analog Drive.
2. Press and hold the PRESET knob and turn Analog Drive on by plugging in the power adapter to the
Power inlet. The display shows UP.
3. Send the OS SysEx file.
4. Restart the Analog Drive to return to normal use.
The display shows AA if the upgrade is successful. If the display shows EE, the upgrade failed, and you
MUST repeat the OS upgrade process before you can use the Analog Drive again.

6.4 FACTORY RESET

You can reset the Analog Drive to the state it was when it left the factory with all its settings and pre-
sets reverted to its original state.
1. Press and hold [FOOTSWITCH LEFT] and [FOOTSWITCH RIGHT], and then turn the Analog Drive
on by plugging in the power adapter to the Power inlet. The display first shows FR, then YN.
2. Turn the PRESET knob so that Y starts blinking, and then press PRESET to initiate the factory
reset.
16
Display Description
SysEx send and receive utility.
N.B. This is a function, not a setting that can be saved.
Sending SysEx
AL = Send all presets.
00—99 = Send only the chosen preset.
Press PRESET to initiate sending SysEx data
Receiving SysEx
AL = Receive all sent presets in its original preset positions
00—99 = Receive all sent presets starting at the chosen preset
position and then filling the preset slots upwards. After it reaches
slot 99, it goes on to 00.