Elektron analog drive User Manual page 15

Setting Display
Output Channel
Output Thru
Expression Mid
Expression Gain
Expression
Destination
Preset Destination
Continuous con-
trollers Destination
Description
Sets the MIDI channel that Analog Drive uses to send MIDI data. No
MIDI data is sent when set to OF (OFF). (Range 1—16, OF)
Sets the behavior of the MIDI OUT port.
OF = Off. Only sends data from the pedal.
ON = On. Forwards data from MIDI IN.
MM = Midi Merge. Merges and sends the data both from the MIDI
IN port and from the pedal.
Sets the Exp Mid jack to receive CV or Expression pedal signals.
E = Expression
CU = CV
To calibrate the range of the expression pedal: Connect the expres-
sion pedal to Exp Mid. Press PRESET and move the expression
pedal to max and then to min position.
Sets the Exp Gain jack to receive CV or Expression pedal signals.
E = Expression
CU = CV
To calibrate the range of the expression pedal: Connect the expres-
sion pedal to Exp Gain. Press PRESET and move the expression
pedal to max and then to min position.
Sets the destination of the signal from Exp Gain and Exp Mid.
IE = Internal and External (MIDI)
– E = Only External (MIDI)
I– = Only Internal
– – = No destination
Sets the destination of the PRESET knob (Program change).
IE = Internal and External (MIDI)
I– = only Internal
Sets the destination of the continuous controllers (knobs).
IE = Internal and External (MIDI)
– E = Only External (MIDI)
I– = Only Internal
– – = No destination
15