Introduction; System - Delta SI 5000 Operation And Installation Manual

3

Introduction

With this device you have acquired a solar inverter for the mains connection of photovoltaic sys-
tems. This solar inverter is characterized by its advanced housing design and state-of-the-art radio
frequency technology, which enable the highest levels of efficiency.
The solar inverter includes series monitoring units, such as anti-islanding protection, display and
RS485 (EIA485) interface.
The inverter is usable indoors and outdoors. It fulfills the directives of the VDEW (Union of German
Electrical Power Stations) for parallel operation of power generation plants on low-voltage network
of regional electrical utility companies.
The function of the anti-islanding protection (automatic isolation point for in-plant generation sys-
tems) stipulates compliance with the specifications of DIN VDE 0126-1-1 and compliance with the
low-voltage guideline. These are declared through the attached GS-Innova character and the CE
mark (see page 60, section 12).
In the following technical description, the precise functions are explained to the installer, as well
as the user, which are required for the installation, operational start-up and handling of the solar
inverter.
4

System

The content of renewable energy with respect to overall power consumption worldwide is increas-
ing annually by approx. 25%. The reason for this rise can be primarily attributed to the constantly
increasing demand for power, the increasing interest in environmentally friendly technologies, as
well as the increasing costs of non-renewable energy.
By the use of renewable energy sources, the earth's atmosphere can be enormously relieved of
increases in CO and other harmful gases which result from power generation.
2
The solar inverter converts direct current from the solar cells into alternating current. This enables
you to feed your self-produced solar energy into the public mains.
Thanks to efficient MPP tracking, maximum capacity utilization of the solar energy plant is ensured
even in case of a misty and clouded over sky.
The string concept means that PV modules are always connected in series (in a string) and/or that
strings with the same voltage are connected in parallel to the solar inverter with the aim of signifi-
cantly reducing the photovoltaic system's cabling requirements.
The fact that the modules are connected in strings also means that the photovoltaic system
can be perfectly matched to the solar inverter's input voltage range.
35