Configuring The Ip Address - GeoVision GV-EBD4700 Quick Start Manual

4.3 Configuring the IP Address

If the camera is connected to LAN without a DHCP server, the default IP address will be
192.168.0.10. Follow the steps below to modify the IP address to avoid IP conflict with other
GV-IP devices on the same LAN.
1. Open your web browser, and type the default IP address http://192.168.0.10.
2. In both Login and Password fields, type the default value admin. Click Apply.
3. Click Setup, select Network in the left menu and select TCP/IP.
4. Select Static IP from the IP Obtain Mode drop-down list.
5. Enter the IP address, subnet mask, and default gateway address. Make sure that the IP
address of the camera is unique in the network.
6. Click Save.
12