Altitude Adjustment Setting - Kyocera ECOSYS P2235dn Service Manual

Wireless network setting
When setting up the connection of the model equipped with the Wi-Fi function, printing is available in a wireless network
(wireless LAN) environment.
The configuration methods are as follows:
Configuration Method
Setting the Connection by Using
the Wi-Fi Setup Tool
Configuring Connections on the
Web Page
NOTE
If you switch other network interface than wired, change to the appropriate setting value in [Primary Network].

(7-2)Altitude Adjustment Setting

Execute [Maintenance Menu] from DVD (Product Liberty) when setting up at a high altitude place. When the usage
environment is at altitudes of sea level 1,000m or more and the printing quality is declined, set the altitude adjustment
mode and you can recover the print quality.
This is the tool included in the Product Library. You can configure the con-
nection according to the instructions provided by the wizard.
It can be set from the Command Center RX.
2-16
2RV/2RW/2RX/2RY/3RA
Descriptions