7 Troubleshooting
7-1 Conveying failures
(1) Prior standard check items
No.
(1-1)
Paper jam due to the cover-open detection
(1-2)
Paper jam due to the wave or curl in the fuser section of the damp paper
(1-3)
Paper jam due to the dog-ear, paper skew, paper creases, fusing failure or the paper curl
(1-4)
Paper jam caused by the conveying guide, paper entry guide or the feedshift guide
(1-5)
Paper jam caused by incorrectly loaded paper in the cassette or the paper deck
(1-6)
Paper jam due to the inferior paper
(1-7)
Paper jam caused by the conveying rollers or the paper feed pulleys
(1-8)
Paper jam due to the sensor
(1-9)
Paper jam due to the setting / detection failure
(1-10)
Paper jam due to the static electricity
(1-11)
Paper jam caused by installation in the environment where paper inside the cassette is always
moist.
Contents
7-1
2RV/2RW/2RX/2RY/3RA