OSEE LMW-200 SERIES User Manual page 21

1
-AUTO SETUP
-SHIFT H
-SHIFT V
-DOT PHASE
1. For "AUTO SETUP" menu, it is valid for VGA input, but not valid for DVI input.
AUDIO CONFIG
For the video inputs include SDI1, SDI2, Line1, Line2 or DVI-I (HDMI input only), the following
items are displayed.
Sub Menu Settings
AUDIO CONFIG 1/3
GENERAL SETUP
-NEXT PAGE
-SOURCE TYPE
-SPEAKER L
Sub Menu Settings
-SPEAKER R
LMW-200 SERIES LCD MONITOR
Automatic Pixel Adjustment, press to adjust the
picture automatically to maximize clarity and correct
H/V position for the VGA input signal
50 Adjusts the horizontal position of the picture
<0-100>
50 Adjusts the vertical position of the picture
<0-100>
50 Adjusts the dot phase
<0-100>
Explanation
EXT Used to select the audio source type
<EXT>
<EBD> can be selected only for SDI or HDMI input
<NONE>
AUD 1L Select the audio channel to the left speaker based on the
(EBD CH1) selected audio source type
<OFF>
If SOURCE TYPE is EXT
<AUD 1L, AUD 1R, AUD 2L, AUD 2R>
If SOURCE TYPE is EBD and SDI input
<EBD CH1 – EBD CH16>
If SOURCE TYPE is EBD and HDMI input
<EBD CH1 – EBD CH2>
Explanation
AUD 1R The same as above
(EBD CH2)
—16—
User Manual