Cast Grill Installation - HAMPTON BAY HI300 Owners & Installation Manual

installation
|
18
GLASS REMOVAL TO INSTALL
OPTIONAL DOOR CAST GRILL
1. To remove the glass, loosen the two 7/16" bottom retainer
bolts but do not remove.
2. Remove the sides and top retainer and bolts highlighted in the
diagram and carefully remove glass, it will fall towards you
at the top.
3. Place the grill in the door, make sure that the glass gasketing
on the left and right bracket is facing you.
4. Carefully place the glass (black strip up) into the bottom re-
tainer. Keeping it in place, re-install the sides and top retainer
and bolts. Do not tighten bolts, i nger tight only.
5. Lift the bottom of the glass upwards till it stops, secure glass
retainer using the 8 bolts. Do not wrench down on the bolts,
as this may cause the glass to break.
18 |
Hampton HI300 Wood Cast Insert

CAST GRILL INSTALLATION

Remove 6 - 7/16" Bolts
Avoid impact on glass doors such
as striking or slamming shut.