Configuration (Dmx); Dmx Personalities; Dmx Control; Dmx Values - Ovation E-910FC User Manual

Configuration
(DMX)
DMX
Personalities

DMX Control

DMX Values

15Ch

Channel Function
10
11
12
13
14
15
Ovation E-910FC User Manual Rev. 8
Use DMX configurations to operate the product with a DMX controller.
This setting allows you to choose a particular DMX personality.
1. Go to the DMX Channel main level.
2. Select the desired personality (3Ch, 5Ch, 7Ch, 10Ch, 12Ch, 13Ch, or 15Ch).
·
See the DMX Values
personality.
·
Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
In this mode, each product will respond to a unique starting address from the DMX controller. All
products with the same starting address will respond in unison.
1. Select a DMX personality as shown in
2. Set the running mode:
a. Go to the Master/Slave main level.
b. Select the Master programming level.
3. Set the starting address:
a. Go to DMX Address main level.
b. Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
DMX DMX
Personality Address
3Ch
10Ch
15Ch
1 Dimmer
2 Dimmer Fine
3 Red
4 Red Fine
5 Green
6 Green Fine
7 Blue
8 Blue Fine
9 Amber
Amber Fine
Lime
Lime Fine
Strobe
Virtual Color Wheel
Color Temperature
section for the highest starting address you can select for each
DMX
DMX
Personality
510 5Ch
503 12Ch
498
Value Percent/Setting
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó010 No function
011ó255 Strobe, slow to fast
000ó255 Refer to the
specific values.
000ó255 Refer to the
for specific values.
Personalities.
DMX DMX
Address Personality
508 7Ch
501 13Ch
Virtual Color Wheel Chart
Preset Color Temperature Chart
Operation
DMX
Address
506
500
section for
section
-15-