Table of Contents
Advertisement
LAMONA Appliances
Your oven comes prefi tted with a mains cable. If you need to change it:
1.
Open the terminal block cover with screwdriver.
2.
Pass the mains lead under the cable clamp and secure clamp with the screw over the outer cable
insulation
3.
Connect the cables according to the supplied diagram.
4.
Close the cover of the terminal block once the wiring is complete.
5.
Mains cable must not be longer than 2 metres for safety reasons.
6.
The mains lead should be routed away from the appliance and not be trapped between the appliance
and the wall.
Brown
(Live)
The product should only be installed by suitably
qualifi ed persons.
i
The product must be installed in accordance
with all local regulations.
i
Prior to installation, visually check the product
for any damage/defects. Do not install if any issues
are found.
Damaged products may cause risks to your own
safety.
Before installation
The appliance is intended for installation in
Howdens kitchen cabinets.
•
Surfaces, synthetic laminates and adhesives
used must be heat resistant.
•
Kitchen cabinets must be set level and fi xed.
•
If there is a drawer beneath the oven, a shelf
must be installed between oven and drawer.
•
The following installation drawings are
representational and may not match exactly
with your appliance.
26_
Blue
(Neutral)
Green/Yellow
(Earth)
3
L3
4
2
L2
5
N
1
L1
E
3NAC 380/400/415 V
EUROPEAN TERMINALS
Cooling Fan
1.
Cooling fan
2.
Fascia
3.
Top oven / grill and main oven
L2
3
4
2
5
N
1
L1
E
2NAC 380/400/415 V
Installation
Hide quick links:
Advertisement
Table of Contents
