Table of Contents
Advertisement
Your oven comes prefi tted with a mains cable. If you need to change it:
1.
Open the terminal block cover with screwdriver.
2.
Pass the mains lead under the cable clamp and secure clamp with the screw over the outer cable
insulation
3.
Connect the cables according to the supplied diagram.
4.
Close the cover of the terminal block once the wiring is complete.
5.
Mains cable must not be longer than 2 metres for safety reasons.
6.
The mains lead should be routed away from the appliance and not be trapped between the appliance
and the wall.
Brown
(Live)
Installation
Slide the oven through the cabinet aperture, align
and secure.
Fix your oven with the 2 screws and washers as
indicated in the illustration.
Final check
Connect the appliance to the mains supply,
switch on the mains supply and check the oven's
functions,
i
The clock time must be set in order for the
main functions to work. Refer to initial use
section for further info.
Blue
(Neutral)
Green/Yellow
(Earth)
3
L3
2
L2
N
1
L1
E
3NAC 380/400/415 V
EUROPEAN TERMINALS
Cooling fan
1
Fan
2
Control panel
3
Door
The Built-in cooling fan cools both the front of the
appliance and cabinetry.
i
Do not switch the oven off at the mains
isolation switch immediately after cooking.
Cooling fan continues to run for up to 20-30
minutes (approx) even after the oven control is
turned off.
User manual LAM4603
L2
3
4
4
2
5
5
N
1
L1
E
2NAC 380/400/415 V
Installation
_ 25
Hide quick links:
Advertisement
Table of Contents
