Lamona LAM4406 Quick Start Manual

Electrical Installation
• Enquiries regarding the installation of
the cooker point, if required, should be
made to your Regional Electricity Com-
pany to ensure compliance with their
regulations.
• The appliance socket switch should be
outside the cabinet but within 2 m of
the appliance to make it accessible to
switch off the appliance in case of an
emergency.
• To protect the hands, wear gloves
when lifting the oven into its housing.
HOUSE CIRCUIT
Earth leakage and continuity tests
must be carried out before the ap-
pliance is connected to the mains
supply and re-checked after fit-
ting.
GETTING THINGS READY
CHOICE OF ELECTRICAL
CONNECTION
There are three possible ways to connect
your appliance. In each case the appli-
ance should be operated using at least 6
mm² twin core and earth PVC insulated
multicore cable. Please choose from the
most appropriate after reading the differ-
ent methods :
a) By connecting to a cooker point (hav-
ing a double pole isolating switch with
at least 3 mm contact separation in all
poles and neutral) and protected with
a fuse or miniature circuit breaker at
your mains fuse box.
b) By connecting the appliance together
with a hob directly to a cooker point(s).
Having a double pole isolating switch
with at least 3 mm contact separation
in all poles and neutral.
c) If you wish to connect an oven and a
hob to a cooker point you can by con-
necting the oven and hob separately
to the cooker point. Oven and hob
units should be separately connected
to a cooker point. (See Picture)
C
A) Cooker Point
B)
Hob
C) Oven
It is good practice to :
– Fit an Earth Leakage Circuit
Breaker to your house wiring.
– Wire your appliance to the latest
IEE regulations.
A
B