Replacing The Oven Lamp - Lamona LAM4405 Instructions & Installation Manual

LAMONA Appliances
Removing oven door inner glass
The inner glass panels of the door can be removed
for cleaning.
When cleaning, avoid the use of any harsh abrasive
chemicals or sharp metal scrapers as this could
stratch the surface and damage the glass.
Please be aware when removing and cleaning the
glass that the door has the potiential to spring
closed.
We recommend you support the door at all times or
remove the entire door assembly prior to attempting
to clean it.
In order to do this:
1. Open the door fully.
2. The top plastic cap can be pulled away from the
retaining clips.
3. The upper glass can be slid out of its retaining
slots and the inner glass can be removed.
Care and maintenance
22_
4. To replace the glass follow this process in reverse
ensuring the printed surface of the glass is facing
downwards.
Ensure the glass is fully located in the lower
retaining slots before attempting to re- f i t the
top cap.

Replacing the oven lamp

Hot surfaces may cause burns!
Make sure that the appliance is switched off
and cooled down in order to avoid the risk of an
electrical shock or burns.
i
The oven lamp is a special electric lamp that
can resist up to 300°C. See Technical
specifi cations, for details.
i
Position of lamp might vary from the diagram.
1. Disconnect the product from mains.
2. Turn the glass cover counter clock-wise to
remove it.
3. Remove the oven lamp by turning it counter
clockwise and replace it with the new one.
4. Install the glass cover