Replacing The Oven Lamp - Lamona LAM3503 Instructions And Installation

Cleaning oven door and removing
the inner glass
Hot surfaces may cause burns!
when cleaning make sure that the appliance is
switched off and cooled down in order to avoid the
risk of an electrical shock or burns.
Don't use any harsh abrasive cleaners or sharp
metal scrapers for cleaning the oven door or glass,
as they could scratch the surface and damage the
oven
The inner door glass can be removed to assist in
cleaning.
To remove the glass:
1. open the door fully.
2. The top cap can be pulled away from the
retaining clips.
Please Note: When the upper cap is removed,
the glass will become loose, therfore care must be
taken to suport the glass at all times.
3. The glass can now be lifted away from the door
assembley.
4. To replace the glass follow this process in
reverse ensuring the printed surface of the
glass is facing downwards.
Ensure the glass is fully located in the lower
retaining slots before attempting to re-fit the top cap.
To clean the side wall
1. Remove the front section of the side rack by
pulling it in the oppsite direction of the side wall.
2. Remove the side rack completely by pulling it
towards you.

Replacing the Oven Lamp

Make sure that the appliance is switched off and
cooled down in order to avoid the risk of an electric
shock or burns.
resist up to 300ºC. (See technical specifications)
1. Disconnect the oven from the mains
2. Turn glass outer cover counter clockwise to
3. Remove oven lamp by turning counter
.
4. Replace with new lamp.
5. Replace glass outer cover.
Exclusive to Howdens Joinery.co
Hot surfaces may cause burns
The oven lamp is a special lamp that can
remove.
clockwise. (Dispose of carefully).
User manual LAM3503/4
Page _ 22