All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips. Published by WS 0662 Customer Service...
EN 2 EL1.1U Technical Specifications, Connections, and Chassis Overview 1. Technical Specifications, Connections, and Chassis Overview Index of this chapter: - Maximum humidity : 90% R.H. 1.1 Technical Specifications 1.2 Connection Overview 1.3 Chassis Overview Power consumption (values are indicative) : ≈...
Page 3
Technical Specifications, Connections, and Chassis Overview EL1.1U EN 3 USB1.1 Wh - Audio L 0.5 V / 10 kohm Rd - Audio R 0.5 V / 10 kohm AV1 Cinch: Video YPbPr - In, Audio - In Gn - Video Y / 75 ohm E_06532_022.eps...
Page 4
EN 4 EL1.1U Technical Specifications, Connections, and Chassis Overview LCD SUPPLY STANDBY / PANEL AUDIO PANEL SIDE I/O PANEL CONTROL BOARD LED PANEL SMALL SIGNAL BOARD G_16290_069.eps 310106 Figure 1-6 PWB/CBA locations (32-inch model) SMALL SIGNAL BOARD LCD SUPPLY PANEL...
Page 5
Technical Specifications, Connections, and Chassis Overview EL1.1U EN 5 STANDBY / AUDIO PANEL LCD SUPPLY PANEL CONTROL BOARD SIDE I/O PANEL IR / LED PANEL SMALL SIGNAL BOARD G_16290_095.eps 030206 Figure 1-8 PWB/CBA locations (42-inch model)
EN 6 EL1.1U Safety Instructions, Warnings, and Notes 2. Safety Instructions, Warnings, and Notes Index of this chapter: Service Default Mode (see chapter 5) with a color bar 2.1 Safety Instructions signal and stereo sound (L: 3 kHz, R: 1 kHz unless stated 2.2 Warnings...
Page 7
Lead Free Solder soldering tin and components, all needed spare parts will be available till the end of the service period. For the repair Philips CE is producing lead-free sets (PBF) from 1.1.2005 of such sets nothing changes. onwards. In case of doubt whether the board is lead-free or not (or with...
EN 8 EL1.1U Directions for Use 3. Directions for Use You can download this information from the following websites: http://www.philips.com/support http://www.p4c.philips.com As the software upgrade is a new feature, it is explained below.
Mechanical Instructions EL1.1U EN 9 4. Mechanical Instructions Index of this chapter: Notes: 4.1 Cable Dressing • Several models in this chassis range have a different 4.2 Service Positions mechanical construction, the instructions given in this 4.3 Assy/Panel Removal chapter are therefore very model specific.
Page 11
Mechanical Instructions EL1.1U EN 11 G_16290_092.eps 030206 Figure 4-4 Cable dressing (42-inch model) Service Positions 4.2.2 Aluminium Stands For easy servicing of this set, there are a few possibilities created: • Foam bars (created for Service). • Aluminium service stands (created for Service).
Page 12
EN 12 EL1.1U Mechanical Instructions Assy/Panel Removal 4.3.6 Stand-by Power Supply/Audio Amplifier Panel (if present) 1. Disconnect all cables [1] from the panel. 4.3.1 Rear Cover 2. Remove the fixation screws [2] from the panel. The positioning might differ from the locations as indicated in Warning: Disconnect the mains power cord before you remove Figure “Stand-by/Audio panel”.
Page 13
Mechanical Instructions EL1.1U EN 13 4.3.8 Small Signal Board (SSB) Take care not to damage the fragile LVDS cable. Ensure that the conducting tape [1] at both sides of the panel is secured for re-assembly (see Figure “Conducting tape”). 10. After removal of the metal frame, you can lift the LCD panel from the front cabinet.
Page 14
EN 14 EL1.1U Mechanical Instructions G_16290_077.eps 310106 Figure 4-15 Conducting tape Set Re-assembly To re-assemble the whole set, execute all processes in reverse order. Notes: • While re-assembling, make sure that all cables are placed and connected in their original position. See Figure "Cable dressing".
Service Modes, Error Codes, and Fault Finding EL1.1U EN 15 5. Service Modes, Error Codes, and Fault Finding Index of this chapter: in the channel map and could be different from the one 5.1 Test Points corresponding to the physical channel 3.
Page 16
EN 16 EL1.1U Service Modes, Error Codes, and Fault Finding • To easily identify the used software version. adapt this option, use ComPair. The correct HEX values for the • To view operation hours. options can be found in the table below.
Page 17
Service Modes, Error Codes, and Fault Finding EL1.1U EN 17 • With the “CURSOR LEFT/RIGHT” keys, it is possible to: maximum). Change via”MENU”, “TV”, “SOUND”, – (De) activate the selected menu item. “HEADPHONE VOLUME”. – (De) activate the selected submenu.
Page 18
EN 18 EL1.1U Service Modes, Error Codes, and Fault Finding “CHANNELS”, “MOVIE RATINGS LOCK”. Possible values Stepwise Start-up are: “ALL”, “NR”, “G”, “PG”, “PG-13”, “R”, “NC-17” and “X”. • V-Chip Tv Status. Indicates the setting of the V-chip as The stepwise start-up method, as known from FTL/FTP sets is applied by the selected TV channel.
Page 19
Service Modes, Error Codes, and Fault Finding EL1.1U EN 19 Stand-by or action holder: MIPS Protection action holder: St-by Mains is applied autonomous action Standby Supply starts running. +5V2, 1V2Stb, 3V3Stb and +2V5D become present. In case of PDP 3V3 Vpr to CPU PDP becomes present.
Page 20
EN 20 EL1.1U Service Modes, Error Codes, and Fault Finding From part A From part B action holder: MIPS action holder: St-by autonomous action detect-1V2 received within +1.2V error 250ms? Enable the supply for +2.5V and +3.3V (ENABLE-3V3) No separate enable and detect is present for the +2V5 supply in the Baby Jaguar.
Page 21
Service Modes, Error Codes, and Fault Finding EL1.1U EN 21 From part B From part B From part B action holder: MIPS Wait 10ms action holder: St-by Enable Alive check mechanism autonomous action Switch the NVM reset line HIGH. MIPS reads the wake up reason Wait until Viper starts to from standby µP.
Page 22
EN 22 EL1.1U Service Modes, Error Codes, and Fault Finding action holder: MIPS 26" /32" / 37" / 42" LCD LPL action holder: St-by autonomous action Semi Standby Wait until previous on-state is left more than 2 seconds ago. (to prevent LCD display problems)
Page 23
Service Modes, Error Codes, and Fault Finding EL1.1U EN 23 26" /32" / 37" / 42" LCD LPL action holder: MIPS Active action holder: St-by autonomous action Mute all sound outputs. Switch reset-audio and sound-enable lines “high”. Switch “off” LCD lamp.
Page 24
EN 24 EL1.1U Service Modes, Error Codes, and Fault Finding action holder: MIPS Semi Stand-by action holder: St-by autonomous action Transfer Wake up reasons to the Stand- by µP. Images are re-transferred to DDR-RAM from Flash RAM (verification through checksum).
Page 25
Service Modes, Error Codes, and Fault Finding EL1.1U EN 25 action holder: MIPS action holder: St-by autonomous action Log the appropriate error and set stand-by flag in NVM Redefine wake up reasons for protection state and transfer to stand-by µP.
Page 26
ComPair CONNECTOR CONNECTOR Introduction ComPair (Computer Aided Repair) is a service tool for Philips Consumer Electronics products. ComPair is a further development on the European DST (service remote control), which allows faster and more accurate diagnostics. ComPair has three big advantages: 1.
Service Modes, Error Codes, and Fault Finding EL1.1U EN 27 Error Codes – 00 00 00 00 00: No errors detected – 06 00 00 00 00: Error code 6 is the last and only detected error 5.5.1 Introduction –...
EN 28 EL1.1U Service Modes, Error Codes, and Fault Finding pins on the SSB. Due to hardware restriction (I C bus 2 is The Blinking LED Procedure the fast I C bus) it will be impossible to start up the VIPER and therefore it is also impossible to read out the error 5.6.1...
Page 29
Service Modes, Error Codes, and Fault Finding EL1.1U EN 29 Protections Fault Finding and Repair Tips 5.7.1 Software Protections Read also paragraph "Error Codes" - "Extra Info". Most of the protections and errors use either the stand-by 5.8.1 Exit “Factory Mode”...
(e.g. USB memory stick). You can download the new software standalone set, without the need of an E-JTAG debugger. A from the Philips website to your PC. description on how to upgrade the main software can be found in chapter 3 "Directions For Use".
Page 31
TV into the software upgrade application. To do so: • Disconnect the TV from the Mains/AC Power. • Press the “OK” button on a Philips DVD RC-6 remote control (it is also possible to use the TV remote in "DVD" mode). •...
Page 32
EN 32 EL1.1U Service Modes, Error Codes, and Fault Finding Personal Notes: E_06532_012.eps 131004...
Block Diagrams, Test Point Overviews, and Waveforms EL1.1U AA EN 33 6. Block Diagrams, Test Point Overviews, and Waveforms Wiring Diagram 26” LCD WIRING 26” LCD 8740 8740 LCD PANEL X220 RIGHT LEFT SPEAKER SPEAKER LCD SUPPLY INVERTER LVDS INVERTER...
Block Diagrams, Test Point Overviews, and Waveforms EL1.1U AA EN 37 Block Diagram Supply 32” SUPPLY 32" MAINS FILTER + STANDBY PART A SUPPLY PART A COLD CONNECTIONS 3028 7002 TCET1102 1316 1308 5401 1450 7030 5402 BIAS SUPPLY 3031...
Block Diagrams, Test Point Overviews, and Waveforms EL1.1U AA EN 39 Block Diagram Supply 42” SUPPLY 42" MAINS FILTER + STANDBY PART A SUPPLY PART A COLD CONNECTIONS 3028 7002 7030 DC_PROT TCET1102 1316 DC_PROT 5400 5401 1308 5403 1450...
Block Diagrams, Test Point Overviews, and Waveforms EL1.1U AA EN 40 Block Diagram Video VIDEO B02B MAIN TUNER MPIF MAIN: PNX 2015: VIPER: B05B VIPER: MAIN MEMORY 7A00 PNX3000HL 7J00 7V00 7V01 PNX2015E PNX8550 K4D551638F B03B B03C 1T04 1A10 B04C...
Page 98
Circuit Diagrams and PWB Layouts EL1.1U AA EN 98 SSB: SRP List Part 1 SRP List: Not available at the time of writing. As soon as it becomes available, a Service Info or Service Manual update will be issued via the appropriate channels.
Page 99
Circuit Diagrams and PWB Layouts EL1.1U AA EN 99 SSB: SRP List Part 2 SRP List: Not available at the time of writing. As soon as it becomes available, a Service Info or Service Manual update will be issued via the appropriate channels.
Page 100
Circuit Diagrams and PWB Layouts EL1.1U AA EN 100 Layout SSB (Top Side Overview) 1740 F1 2G64 E2 2M16 F1 2T62 A2 3H57 D3 3L84 C3 3Q02 D2 5Q02 D3 9LA3 C3 1A01 A2 2G65 E2 2M18 F1 2T63 A2...
Page 101
Circuit Diagrams and PWB Layouts EL1.1U AA EN 101 Layout SSB (Top Side Part 1) Part 1 G_16290_050a.eps 270106...
Page 102
Circuit Diagrams and PWB Layouts EL1.1U AA EN 102 Layout SSB (Top Side Part 2) Part 2 G_16290_050b.eps 270106...
Page 103
Circuit Diagrams and PWB Layouts EL1.1U AA EN 103 Layout SSB (Overview Bottom Side) 1A10 A3 2D50 F1 2U64 E2 3D45 F1 3LN2 B2 3U93 F2 7D26 F2 1T01 A3 2D51 F2 2U65 E2 3D49 F1 3LN3 C2 3U94 F2...
Page 104
Circuit Diagrams and PWB Layouts EL1.1U AA EN 104 Layout SSB (Bottom Side Part 1) Part 1 G_16290_051a.eps 270106...
Page 105
Circuit Diagrams and PWB Layouts EL1.1U AA EN 105 Layout SSB (Bottom Side Part 2) Part 2 G_16290_051b.eps 270106...
Circuit Diagrams and PWB Layouts EL1.1U AA EN 113 Front IR / LED Panel (26”) Layout Front IR / LED Panel (26”) (Top Side) 1870 A1 6801 A3 6805 A3 7802 A2 1870 B1 3801 B2 3804 B1 4801 B3...
Circuit Diagrams and PWB Layouts EL1.1U AA EN 114 Front IR / LED Panel (32”, 37”, & 42”) Layout Front IR / LED Panel (32”, 37”, & 42”) (Top Side) 1870 A1 6801 A1 7802 A1 7808 A1 1870 B1...
Alignments EL1.1U EN 121 8. Alignments Software Alignments Index of this chapter: 8.1 General Alignment Conditions 8.2 Hardware Alignments Put the set in SAM mode (see the "Service Modes, Error Codes 8.3 Software Alignments and Fault Finding" section). The SAM menu will now appear on 8.4 Option Settings...
Page 122
EN 122 EL1.1U Alignments Method 2 (without color analyzer): If you do not have a color analyzer, you can use the default values. This is the next best solution. The default values are average values coming from production (statistics). 1. Select a COLOUR TEMPERATURE (e.g. COOL, NORMAL, or WARM).
26PF5321D Eco ME5 15W e.g. 32/37/42PF5321D Eco ME6 5W e.g. Others n.a. Miscellaneous Alternative Tuner Philips / Alps Tuner brand Tuner Type TD1336S Tuner type Opt. no. Group 1 xxxxx xxxxx xxxxx xxxxx (see set sticker) Group 2 xxxxx xxxxx xxxxx xxxxx (see set sticker) 8.4.4...
Page 124
3 (8) Interconnect China IF 0= Off, 8= On 4 (16) Alternative Tuner 0= Philips, 16= Alps Tuner make. 5 (32) Tuner Type 0= TD1336s (B-Chassis US), 32= TD1331(J-Chassis US), Tuner type 64= UV1318 (Analogue EU), 96= TD1316 (Hybrid EU) (B-chassis US is e.g "BP2.3U").
Page 125
Alignments EL1.1U EN 125 Byte Bit (dec. value) Subject Options Settings (in decimal values) Remarks 0 (1) Display Screen See table “Display code overview” in chapter “Service Modes”for the values. Screen size, type, and resolution. 1 (2) 2 (4) 3 (8)
EN 126 EL1.1U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9. Circuit Descriptions, Abbreviation List, and IC Data Sheets Index of this chapter: When the input channel is a digital channel, it is processed via 9.1 Introduction the QAM demodulator and then passed to the multi-media 9.2 Abbreviation List...
Page 127
Circuit Descriptions, Abbreviation List, and IC Data Sheets EL1.1U EN 127 SSB Cell Layout Figure 9-1 SSB top view Figure 9-2 SSB bottom view...
EN 128 EL1.1U Circuit Descriptions, Abbreviation List, and IC Data Sheets Abbreviation List CVBS Composite Video Blanking and Synchronization Digital to Analogue Converter 0/6/12 SCART switch control signal on A/V Dynamic Bass Enhancement: extra board. 0 = loop through (AUX to TV), 6...
Page 129
I, L is all bands except for Band I Quadrature Amplitude Modulation; LORE LOcal REgression approximation modulation method noise reduction QTNR Quality Temporal Noise Reduction LG.Philips LCD (supplier) QVCP Quality Video Composition Processor Loudspeaker Random Access Memory LVDS Low Voltage Differential Signalling Red, Green, and Blue. The primary color signals for TV.
Page 130
4.406250 MHz and 4.250000 MHz Sound Intermediate Frequency SMPS Switched Mode Power Supply Sync On Green SOPS Self Oscillating Power Supply S/PDIF Sony Philips Digital InterFace SRAM Static RAM Small Signal Board STBY STandBY Sync On Green SVGA 800x600 (4:3)
Circuit Descriptions, Abbreviation List, and IC Data Sheets EL1.1U EN 131 IC Data Sheets This section shows the internal block diagrams and pin configurations of ICs that are drawn as "black boxes" in the electrical diagrams (with the exception of "memory" and "logic"...
Page 132
EN 132 EL1.1U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9.3.2 Diagram A4, MC34067P (IC 7U01) Block Diagram Pin Configuration MC34067 UVLO / Enable / 5.0 V Enable UVLO Adjust Reference Osc Charge One–Shot RC Osc Charge UVLO Variable...
Page 133
Circuit Descriptions, Abbreviation List, and IC Data Sheets EL1.1U EN 133 9.3.4 Diagram B2A, NXT2004 (IC 7T22) Block Diagram VSB/QAM MPEG IF In text text text Demodulator Transport Sense 32K x 8 text BERT text RF Gain SRAM text IF AGC RF AGC µC...
Page 134
EN 134 EL1.1U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9.3.5 Diagram B3A/B/C/D, PNX 3000H (IC 7A00) Block Diagram CVBSOUTA 1× CVBSOUTB 2NDSIFEXT (FMRAD) CVBSOUTIF SIFAGC MIXER SIFIN 2nd SIF internal & AM SND DEMOD DTV 1st IF DTVOUT...
Page 135
Circuit Descriptions, Abbreviation List, and IC Data Sheets EL1.1U EN 135 9.3.6 Diagram B4A/B/C/D/E/F, PNX 2015 (IC 7J00) Block Diagram 16-BIT 225 MHz DDR PNX2015 MEMORY CONTROLLER video NORTH TUNNEL SOUTH TUNNEL PNX8550 coprocessor HD input (TDA9975) MEMORY VO-1 BASED SCALER...
Page 136
EN 136 EL1.1U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9.3.7 Diagram B5C, VIPER (IC 7V00) Block Diagram Streaming Interface Optional External 32-Bit 225 MHz DDR from Tunnel Video Improvement Processing PNX8550 Memory 30 (dig) DVD-CSS 5-Layer Controller Primary...
Page 137
Circuit Descriptions, Abbreviation List, and IC Data Sheets EL1.1U EN 137 9.3.8 Diagram B5F, LD3985M33 (IC 7M05/6) Diagram B6, LD3985M33 (IC 7G42) Diagram B7A, LD3985M33 (IC 7B25) Block Diagram Pin Configuration TSOT23-5L/SOT23-5L Flip-Chip G_16290_084.eps 020206 Figure 9-10 Internal block diagram and pin configuration...
Page 138
EN 138 EL1.1U Circuit Descriptions, Abbreviation List, and IC Data Sheets 9.3.9 Diagram B6, ADV7123KSTZ140 (IC 7G40) Block Diagram BLANK BLANK AND SYNC LOGIC SYNC DATA R9–R0 REGISTER DATA G9–G0 REGISTER DATA B9–B0 REGISTER VOLTAGE POWER-DOWN PSAVE REFERENCE MODE CIRCUIT...
Page 139
Circuit Descriptions, Abbreviation List, and IC Data Sheets EL1.1U EN 139 9.3.10 Diagram B7A, LD1117DT33 (IC 7B45) Block Diagram Pin Configuration LD1117DT DPAK F_15710_166.eps 230905 Figure 9-12 Internal block diagram and pin configuration 9.3.11 Diagram B8A, LM339P (IC 7D10) Block Diagram Pin Configuration G_16290_082.eps...
Spare Parts List EL1.1U EN 141 10. Spare Parts List Not available at the time of writing. As soon as they become available, a Service Info or Service Manual update will be issued via the appropriate channels. 11. Revision List Manual xxxx xxx xxxx.0...