Firmware (Admin) - HP StorageWorks D2D User Manual

Firmware (Admin)

This page provides information about the firmware version of your HP D2D Backup System and allows
you to upgrade the firmware.
1.
Check www.hp.com/support
2.
Select Firmware from the Web Management Interface and click Upgrade.
3.
Make sure that there are no backup or restore jobs in progress and that no future jobs are scheduled
to start whilst the firmware is upgrading. Click Yes.
4.
Click Browse... and locate the upload file that you have just downloaded.
5.
Click Upload to upgrade the firmware. A progress meter is displayed while the upgrade takes
place. The system will reboot once it has been updated. Configuration information and data are
unaffected by this process.
for the latest firmware and download it to your hard disk.
D2D Backup System
81