To Edit Device Details; To Create A New Device - HP StorageWorks D2D User Manual

To edit device details

1.
Click on Select to view the details for the required device and then click on Edit.
2. Amend details as appropriate and click Update to apply them. See

To create a new device

1.
To create a new device, select the appropriate device type (Autoloader or Tape Drive) from the
drop-down menu and click on Create to create a new device for the host.
2.
Enter the appropriate details and click Create. You can find the iSCSI Initiator Name by running the
iSCSI Initiator on the host and copying the Initiator Node Name from the General tab. See also
"To edit device
66
The Web Management Interface
details" on page 66.
"Device parameters" on page 67