Disk & Raid (Status); Raid Status; Disk Usage - HP StorageWorks D2D User Manual

• Anonymous Authentication (anyone can log on, you do not need to provide a Username and
Password when you configure email alerts)
• Basic Authentication, where a user name and password are required and should be provided
when you configure email alerts
NOTE:
Integrated Windows Authentication is not supported with the HP D2D Backup System.
If your SMTP Server requires this form of authentication and you have a spare network
port, we recommend that you create a new virtual SMTP server, allowing connection only
to the HP D2D Backup System. In this instance, you may lock the SMTP server to use
only the HP D2D Backup System's IP address and authentication may safely be set to
anonymous for the dedicated SMTP server.
Disk & RAID (Status)
This page provides information about the RAID status, disk usage and status of the physical disks.
Use it to identify disks that may be failing or disks that are approaching capacity.

RAID status

In normal operation, this shows green, OK.
If one or more disks fail, it shows a warning icon.

Disk usage

This section shows you how much disk space has been used.
Total Disk Usage: The green area is the amount of disk space committed. This always shows
some value because it includes the default 2 GB space committed for each cartridge slot (see
"Considerations when configuring cartridges and
76
The Web Management Interface
slots" on page 19).