8 The Web Management Interface
In this chapter:
• "Web management
• "To run the Web Management
• "Summary
• "Devices
(Configuration)" on page 65
• "Cartridges
• "Network
• "Email Alerts
• "Disk & RAID
• "iSCSI
(Status)" on page 77
• "Log
(Status)" on page 78
• "Shutdown
• "Administration
• "Firmware
• "Support
What is the Web Management interface?
The Web Management Interface is the main interface for:
•
Monitoring the status and health of the HP D2D Backup System and all configured backup devices
•
Changing the number of cartridge slots or creating additional autoloaders, or standalone tape
drives, for a host
•
Managing movement of data to and from a physical tape drive attached to the HP D2D (if
one has been installed)
To run the Web Management Interface
There are two ways of logging on:
•
From the host server or PC: Use the desktop shortcut created by the Installation wizard.
•
From any machine connected to the network: Enter the IP address or fully qualified domain name
(for example, myhpd2d.mydomain.com) of the HP D2D Backup System into the web browser.
The Web Management Interface displays the Login prompt:
The Login is Administrator with an initial password of Admin.
Both names are case sensitive. The password can subsequently be changed from the Administration menu
option, see
"Administration
interface" on page 63
Interface" on page 63
(Home)" on page 64
(Configuration)" on page 67
(Configuration)" on page 71
(Configuration)" on page 74
(Status)" on page 76
(Admin)" on page 79
(Admin)" on page 80
(Admin)" on page 81
(Admin)" on page 82
(Admin)" on page 80.
D2D Backup System
63