Kyocera FS-1060DN Service Manual page 30

Connecting the Network Cable (25/26 ppm model only)
1. Connect the network cable (not
included) to the network interface con-
nector.
Connect the other end of the cable to
the PC or your network device.
*: Use shielded interface cables.
Connecting the power code
1. Connect the power cord to the power
cord connector at the rear of the printer.
2. Connect the other end of the power
cord to a power outlet.
Figure 1-2-19
Figure 1-2-20
1-2-10
2M2/2M3