Kyocera FS-1060DN Service Manual page 119

6. Detaching the paper feed pulley
1.Open the rear cover.
Note:
Perform steps while checking the feed
roller from the paper feed side.
2.Raise the left side lever of the roller
holder.
2.Slide the roller holder leftward.
3.Slide the paper feed pulley.
4.Pull the feed roller by turning it.
7. Refitting the paper feed pulley
1.Insert the new paper feed pulley onto
the right side axle of the roller holder.
2.Turn the paper feed pulley.
3.Turn the paper feed pulley so that its
boss and the cutout on the right-side
roller holder mate with each other.
4.Slide the left-side roller holder.
* : Confirm that it is clicked in and locked.
Left roller holder
2
Roller feed assy
3
Paper feed
pulley
Right roller holder
3
2
1
2-4-7
4
5
1
6
Figure 2-4-15
4
Figure 2-4-16
2M2/2M3
5