Assign The Transmitters To The Mg-Rcv3; Interrelated Digiplex Series Transmitter (Tx) Sections - Paradox MG-RCV3 Reference & Installation Manual

Table 4.2: Interrelated Digiplex Series Transmitter (Tx) Sections
Input #
001
016

4.1 Assign the Transmitters to the MG-RCV3

S :
PECTRA SECTIONS
D
IGIPLEX SERIES
In Spectra systems, up to eight wireless transmitters can be assigned to a MG-
RCV3. In Digiplex series systems, up to 16 wireless transmitters can be
assigned to each MG-RCV3.
The serial number is located on the inside of the transmitter, or you can
use the View Unknown Serial Numbers feature (section 5.1 on page
11) to determine the transmitter's serial number.
For Spectra systems, do not assign detection devices from different
modules to the same expansion input. For example, do not assign a
wireless transmitter to section [601], then connect a detection device
to input Z1 of the APR3-ZX8.
How to assign the transmitters to a MG-RCV3:
Spectra
Sections [601] to [608] represent expansion inputs 1 to 8 respectively. For
example, section [601] is assigned to expansion input 1 and section [602] is
assigned to expansion input 2.
In step 3 in section 3.1 on page 8:
1. Enter a section number between [601] and [608].
2. Enter the 6-digit serial number of the transmitter.
Magellan Wireless Expansion Module
View Tx
Assign Tx
Signal
to module
Strength
[101] [601]
[116] [616]
[601]
TO
: [101]
SECTIONS
View Tx Current
Battery Life
[701]
[716]
[608]
[116]
TO
View Tx
Previous
Battery Life
[801]
[816]
9